Reviews for Perky-Pet® Pinch-Waist Glass Hummingbird Feeder - 8 oz Nectar Capacity
Model
203CPBN
287
Reviews
Sort by
Rating
Newest
Helpfulness
I have several hummingbird feeders ...
Oct 21, 2026
I have several hummingbird feeders and they like this one the most by far...unfortunately...I have to buy a new one every year because the top loop is so thin it eventually breaks due to the constant weight of the nectar and the discoloration from bright red to pale red. I know, I know, keep it out of direct sunlight. The rest of the feeder does not fade. Just the top and then the loop breaks. Is it possible to just buy the top piece without buying the entire feeder?
Response from Admin
Oct 23, 2026
Thank you for the detailed feedback, and we’re glad to hear the hummingbirds favor this feeder. To confirm, replacement parts, including the top hanging loop, aren’t sold separately for this feeder, so a full new unit is needed if that piece breaks. On the discoloration, you’re right that shade helps, but since it’s specifically the top piece fading and cracking while the rest holds up, that section may be getting more direct sun or heat exposure than the body, so adjusting how the feeder hangs, such as angling it so the cap is more shaded or using an S-hook that keeps it from sitting at the very top of a sun-exposed spot, may help slow that specific wear. We’ll pass along your feedback about offering the top piece as a standalone part, since it’s valuable input for future product decisions.
Very disappointed in the quality ...
Oct 20, 2026
Very disappointed in the quality of the plastic . I have had a constant problem with the ant moat hanging loop breaking and the bottom leaking ! In Arizona we a blessed with many Hummingbirds, but I am constantly replacing and you used to make a much better product .
Unless and until you improve your quality, I am forced to find another product from another manufacturer .
Response from Admin
Oct 22, 2026
Thank you for sharing your feedback. We're sorry to hear about the repeated problems with the ant moat's hanging loop breaking and the feeder bottom leaking.
We understand how frustrating it is to keep replacing a feeder that should provide reliable use, especially when you have so many hummingbirds to enjoy in Arizona. The durability of these components directly affects the life of the feeder, and we recognize that your experience has not met the quality you expected from Perky-Pet.
Your comments about the plastic quality, hanging loop, and leaking bottom will be shared with our product team for review. We appreciate your honest feedback and are sorry we've given you reason to consider another brand.
Hanging ring breaks and the company won't do anything about it
Oct 19, 2026
These are the best feeders for attracting hummingbirds, BUT - as many, many others have commented, the hanging ring breaks way earlier than the rest of the feeder. It degrades in the sun and can't bear the weight. I've written to the company about this issue in years past, and it's extremely bad business to knowingly put out this product and expect customers to purchase entirely new systems, and it's terribly wasteful for the planet and the hummingbirds we're supposed to love. I expect an AI response and know this review won't change anything, but Perky Pet should think about its responsibility to its customers and the planet.
Response from Admin
Oct 22, 2026
Thank you for sharing your feedback. We're glad to hear that you find our feeder effective at attracting hummingbirds, but we're truly sorry that the hanging ring has failed prematurely.
We understand your frustration, especially since you've raised this concern with us before, and the rest of the feeder remains usable. A hanging ring that deteriorates before the feeder itself is worn out creates unnecessary waste and expense for our customers, and we recognize that this is a legitimate concern. While we don't offer replacement parts for our bird feeders, we acknowledge that the durability of this component affects the overall life of the product. We will share your comments directly with our product team to highlight the need to address the hanging ring's durability and consider how the design can better meet our customers' expectations.
Thank you for holding us accountable and for taking the time to explain why this issue matters to you and the environment.
I do not, Love the pinch waist feeder ...
Sep 19, 2026
Love the pinch waist feeder for size and shape, birds like it due to the flowers and perch. However; the plastic bottoms spilt, and leak making the feeder, useless. I have been buying these feeders for several years and had brand new feeders spilt within the first couple of fillings. I am well aware of the defective plastic, and therefore I am always very gentle and careful with screwing on the base.
Your cheap plastic and continuing failure to change or improve this product, is going to put you out of business.
Response from Admin
Sep 21, 2026
Thank you for the honest feedback, and we're glad the size, shape, and flower ports are working well for the hummingbirds. We're sorry to hear about the recurring cracking and leaking at the base, and it sounds like you're already doing the right things, hand-tightening rather than overtightening and handling the pieces gently, so this isn't a case of installation error. To help reduce stress on the plastic threads going forward, make sure the bottle neck threads line up evenly before tightening, and hang the feeder out of direct sun and high wind, since heat and movement can accelerate cracking in that base connection over time. We've also shared your feedback on the plastic durability with our product team, as recurring reports like yours are what drive design improvements.
I give it one star ...
Sep 2, 2026
I give it one star only because the hummingbirds love it, but this is the fourth one that we have and every one leaks.
Response from Admin
Sep 4, 2026
We’re glad to hear the hummingbirds love the Perky-Pet® Pinch-Waist Glass Hummingbird Feeder, and we’re sorry to hear about the leaking. To help prevent leaks, make sure the feeder is assembled securely and that the gasket and base are properly seated before filling. Avoid overfilling and keep the feeder upright when hanging. If the feeder continues to leak, checking that the gasket is clean and free of debris can also help create a proper seal. We appreciate you sharing your experience and hope these tips help you enjoy the feeder with your hummingbirds.
Ant moat hoop is faulty needs to be thicker.
Aug 31, 2026
Glass bottle and below parts outlast the ant moat. The ant moat hook loop is the first thing that fails. Plus you can't get a replacement ant moat. So you have to order a whole new feeder.
Response from Admin
Sep 3, 2026
Thank you for taking the time to share your feedback. We’re sorry to hear that the ant moat hook loop did not hold up as expected, and understand how frustrating it is when the rest of the feeder remains in good condition.
Your comments regarding the durability of the ant moat and the availability of replacement parts will be shared with the appropriate team for review and consideration.
Thank you again for your feedback and for giving us the opportunity to improve our products and customer experience.
Poor 'updated' design and build quality
Aug 21, 2026
The 'updated' design and build is poor. The plastic red-color fades quickly and it doesnt take long before either the top hanging plastic part breaks or the bottom cracks and leaks, no matter how gentle you are with it. It's like we went back to the 80's when all of the cheap Chinese garbage that broke right away was flooding the market.
Please bring back your old design using the the proper plastic that will handle sun exposure.
Response from Admin
Aug 25, 2026
We’re sorry to hear about your experience with the updated hummingbird feeder. We understand how disappointing it is when a feeder fades, cracks, or breaks sooner than expected, especially when you’ve handled it carefully.
We appreciate you taking the time to share these specific concerns. Feedback about the durability of the plastic, color fading, and the hanging and base components is important to us and will be shared with our product team for consideration.
We’re sorry the updated design did not meet your expectations, and we appreciate your suggestion regarding the previous design and materials.
After a while <1 year the top ring portion that the hook hangs from breaks. Can’t buy just that part.
Aug 17, 2026
After
Response from Admin
Aug 21, 2026
We’re sorry to hear the top ring on your Perky-Pet® Pinch-Waist Glass Hummingbird Feeder broke. The hanging ring is not available as a separate replacement part for this feeder. We recommend checking that the feeder is securely supported and avoiding excessive weight or force on the hanging ring when installing or removing it. We appreciate you sharing your experience and will pass your feedback along to our product team.
Great concept but took awhile
Jul 27, 2026
Great concept but took awhile to get it skit didn’t leak much. Then the base started cracking and it started leaking again. Feedback was that they would give me 15% offa new one. Should have read all the other reviews with the same problems. Was going to get a new one, but I’m not wasting my time or money again. I hopefully can find a better one e somewhere else.
Response from Admin
Aug 11, 2026
We’re sorry to hear about the leaking and cracking you experienced with your Perky-Pet® Pinch-Waist Glass Hummingbird Feeder. We understand how frustrating it is to have the feeder begin leaking again after the base developed a crack. We appreciate you sharing this feedback and will pass your comments along to our team.
Feeder Leaks
Jun 29, 2026
This would be a 5 start humming bird feeder if it didn't leak. I cannot figure out why it leaks.
Response from Admin
Jul 9, 2026
Thank you for your feedback and for your positive comments about the hummingbird feeder. We're glad to hear you like the feeder, but we're sorry to hear you are experiencing leaking.
Leaking can sometimes occur if the feeder is not fully assembled, the ports or seals are not seated properly, or the reservoir is overfilled. We recommend checking that all components are firmly pressed into place and that the feeder is positioned upright and level when filled.
If these steps do not resolve the issue, please contact us at 855-737-5973 for further assistance. The feeder is backed by a 1-year warranty, and we would be happy to help determine the best solution.
Thank you for taking the time to share your experience. We appreciate your feedback and hope you’re able to enjoy your feeder soon.