Perky-Pet® Window-Mounted Glass Hummingbird Feeder

If you found your way to this website, you are lucky because this feeder comes with no instructions for the necessary disassembly required for mounting, and the packaging does not direct customers to view the website prior to mounting. I am a Mechanical Engineer with 9 us patents and I would have risked damaging the assembly if trying to figure it out on my own. With proper direction it works well

I, as others, have had great difficulty getting this item to stay on the window. I have other window feeders that have no issue. I cleaned the window with an ammonia based cleaner and the suction cups as well, made sure they were dry, and it fell off. I lightly moistened the suction cups and watched it slide down the window. These are durable after 15, 8 foot falls to grass below, no damage. I will try the suction cup massage, but it seems that the plastic ridges around the suction cups won't allow the air to be pressed out. Possibly, the ridges could be shorter to allow the suction cups to be pressed fully to the window. Also the suction cup massage therapy could be added to the package. Thanks

Love these feeders. Have had them for at least 5 year. The suction cups are just now starting to get tired.. However after reading reviews and recommendations, I think I'm going to have hubby do some window cleaning etc. I'm too short. Regardless, I'm ordering more. We have resident hummers in the Pacific Northwest that need looking after..

We love these feeders. We have 2 mounted directly above each other. They are very well made, and with a little care, they last a long time. A proper sized bottle brush will clean the glass bottle as well as the red base. We have 12 hummers that are constantly jockeying for position to feed. Sometimes 8 will share the feeders, 2 at each perch, sometimes they won’t share. They want it all. We mounted ours to the shady side of our deck post to avoid the sun causing damage to the red base. We highly recommend these feeders.

Had this feeder for 5 years and it finally couldn’t hold any longer and fell. Tried to find new suction cups that were big enough but to no avail. Nothing strong enough. I only put one cup in the feeder. With it full I had to check the suction cups a few times a day to make sure it would hold and push in to ensure I had good suction. Must have a clean window service. Cleaned both the glass and cups each time I made new food. To bad I couldn’t get new cups or the feeder would still be up on my window or I would give it a 5 ⭐️ star. To bad Perky Pet didn’t have replacement suction cups available to purchase as the do for other feeders.

I like this hummingbird feeder a lot. There's a little learning curve to securing the suction cups to the window and when they are secured properly, they support the glass bottle very well. The problem that I have had is separating the bottle from the plastic holder when I bring them in to clean and refill. Otherwise, I would have given 5 stars.

Returning this to the Kents Building Supply store today, the suction cups will not hold the feeder on the window and keeps falling off or sliding down the window. Wouldn't recommend this product

This are garbage absolutely garbage. They are heavy glass and when you add the liquid there is no way the suction cup can hold it to a window. I didn't get around to trying them for a while and when I did and found out how bad they were. Perky Pet wouldn't take them back because it was more than 60 days. They did offer an in kind exchange. This wasn't my fault your product doesn't work. I asked for them to test them and hopefully take them off the market, but I see they're still selling them. Doesn't say much for the company.

This is my favorite feeder. I bought 10 of them. The only problem I have ever had is that after a few years the plastic thing that holds the glass ends up breaking. That is why I bought 10 of them. I am wondering if you can get the plastic holder on its own. If so I will order 10 of them. :) When I first bought these my husband left the plastic holder on it filled up the feeder with the liquid and put it on the window with liquid in it. It fell off each time. You must put the plastic holder up by itself on a clean window, wet the suction cups a little bit then put it on pushing in on the suction cups. Let is all dry. (The clean window and the moisture you put on the suction cups) for about 10 minutes just to be safe. Fill up the container and put it on easily. I have never had one fall off.

How do you seperate bracket from feeder like you show in video